FAA-27, Technical Manual, Rev. 1.1, June 2014
7. Operation
There are 3 LEDs and 2 rotary switches on the front panel of FAA-27. The rotary
switches are being used for adjustment as described in chapter 4.4 and the LEDs
have different meanings in operation and setup type as indicated below.
V / I LED
(after power
on)
The status of the LEDs in the operation type is given in the table below. Refer to
chapter 9 in case of the Err LED turns on.
The analogue output signal also gives information about the status of the system and
the weighing process to inform PLC as:
The weight is over the range
( Over signal to PLC )
The weight is under the range
(Under signal to PLC )
“ADC is out of operating range” error to
PLC
Commentaires sur ces manuels